Purchase links for the below will be added at some point.

Hardware Items:

3 x Nema 17 Stepper motors, currently using 50mm depth motors (depth not critical)

2 x Nema 11 Stepper motors, 34mm depth (depth not critical)

14 x POM V slot rollers (used in consumer 3d printers)

1 x Arduino Atmega2560

1 x Ramps 1.4 shield

1 x Graphic Smart Display Controller

6 x 8x16x5mm thrust bearings

10mm belts – 200mm total

2 x 10mm belt guides

2 x 25.4mm metal tube (steel or aluminium) – length to your preference.

5 x Stepper Drivers

Nuts and bolts list:

  • M5 x 45mm countersunk machine screws: 14 pcs
  • M5 locknuts: 14pcs
  • M3 x 12mm countersunk machine screws: 12 pcs
  • M2.5 x 8mm countersunk machines screws: 8 pcs
  • M8 x 40mm bolts: 2 sets
  • M8 washers: 4 pcs
  • M8 locknuts: 2 pcs